H3C Technologies H3C S6300 Series Switches - Manual (Page 268)

255
Operation Description XML example
get-config
Retrieves the non-default
configuration data. If
non-default configuration data
does not exist, the device returns
a response with empty data.
To retrieve non-default configuration data for the
interface table:
<rpc message-id ="100"
xmlns="urn:ietf:params:xml:ns:netconf:ba
se:1.0"
xmlns:xc="http://www.h3c.com/netconf/bas
e:1.0">
<get-config>
<source>
<running/>
</source>
<filter type="subtree">
<top
xmlns="http://www.h3c.com/netconf/config
:1.0">
<Ifmgr>
<Interfaces>
<Interface/>
</Interfaces>
</Ifmgr>
</top>
</filter>
</get-config>
</rpc>
get-bulk
Retrieves a number of data
entries (including device
configuration and state
information) starting from the
data entry next to the one with
the specified index.
To retrieve device configuration and state information
for all interface:
<rpc message-id ="100"
xmlns="urn:ietf:params:xml:ns:netconf:ba
se:1.0">
<get-bulk>
<filter type="subtree">
<top
xmlns="http://www.h3c.com/netconf/data:1
.0">
<Ifmgr>
<Interfaces xc:count=”5”
xmlns:xc=”
http://www.h3c.com/netconf/base:1.0”>
<Interface/>
</Interfaces>
</Ifmgr>
</top>
</filter>
</get-bulk>
</rpc>