H3C Technologies H3C S6300 Series Switches - Manual (Page 274)

261
Operation Description XML example
edit-config:
test-option
Determines whether to issue a
configuration item in the
edit-configure operation. The
test-option element has one of
the following values:
• test-then-set—Performs a
validation test before
attempting to set. If the
validation test fails, the
edit-config operation is not
performed. This is the default
test-option value.
• set—Directly performs the
set operation without the
validation test.
• test-only—Performs only a
validation test without
attempting to set. If the
validation test succeeds, a
successful message is
returned. Otherwise, an
error message is returned.
To issue the configuration for an interface for test
purposes:
<rpc message-id ="101"
xmlns="urn:ietf:params:xml:ns:netconf:ba
se:1.0">
<edit-config>
<target>
<running/>
</target>
<test-option>test-only</test-option>
<config
xmlns:xc="urn:ietf:params:xml:ns:netconf
:base:1.0">
<top
xmlns="http://www.h3c.com/netconf/config
:1.0">
<Ifmgr xc:operation="merge">
<Interfaces>
<Interface>
<Index>262</Index>
<Description>222</Description>
<ConfigSpeed>100</ConfigSpeed>
<ConfigDuplex>1</ConfigDuplex>
</Interface>
</Interfaces>
</Ifmgr>
</top>
</config>
</edit-config>
</rpc>
action
Issues actions that are not for
configuring data, for example,
reset action.
To clear statistics information for all interfaces:
<rpc message-id="101"
xmlns="urn:ietf:params:xml:ns:netconf:ba
se:1.0">
<action>
<top
xmlns="http://www.h3c.com/netconf/action
:1.0">
<Ifmgr>
<ClearAllIfStatistics>
<Clear>
</Clear>
</ClearAllIfStatistics>
</Ifmgr>
</top>
</action>
</rpc>