Configuring the information center, Overview, Log types – H3C Technologies H3C S6300 Series Switches User Manual

Page 85: Log levels

Advertising
background image

72

Configuring the information center

The information center on a device classifies and manages logs for all modules so that network

administrators can monitor network performance and troubleshoot network problems.

Overview

The information center receives logs generated by source modules and outputs logs to different

destinations according to user-defined output rules. You can classify, filter, and output logs based on

source modules. To view the supported source modules, use info-center source ?.

Figure 24 Information center diagram

By default, the information center is enabled. It affects system performance to some degree while

processing large amounts of information.

Log types

Logs are classified into the following types:

Common logs—Record common system information. Unless otherwise specified, the term "logs" in
this document refers to common logs.

Diagnostic logs—Record debug messages.

Security logs—Record security information, such as authentication and authorization information.

Hidden logs—Record log information not displayed on the terminal, such as input commands.

Trace logs—Record system tracing and debug messages, which can be viewed only after the devkit
package is installed.

Log levels

Logs are classified into eight severity levels from 0 through 7 in descending order. The device outputs logs

with a severity level that is higher than or equal to the specified level. For example, if you configure an
output rule with a severity level of 6 (informational), logs that have a severity level from 0 to 6 are output.

Table 6 Log levels

Severity

value

Level Description

0

Emergency

The system is unusable. For example, the system authorization has expired.

Advertising