Usb settings, Configuring usb settings – Xerox WorkCentre 7835ii User Manual
Page 38
Network Connectivity
38
Xerox
®
WorkCentre
®
7800/7800i Series Color Multifunction Printer
System Administrator Guide
USB Settings
USB Settings allow you to set the USB connection mode and the print timeout value.
Configuring USB Settings
1.
In Xerox
®
CentreWare
®
Internet Services, click
Properties > Connectivity > Setup.
2.
For Hardware Ports, next to USB Settings, click Edit.
3.
For USB Connection Mode, select an option:
−
Software Tools: This option disables Direct Printing via Driver. If you use Xerox
®
Copier
Assistant, select this option. Xerox representatives also use this feature to connect directly to
the printer and use diagnostic software and other utilities.
−
Direct Printing via Driver: This option allows you to connect to the printer using a USB cable.
4.
For Print Timeout, type the amount of time in seconds that the printer waits inactive before it
disconnects from a device that is connected to the port. Type
0 to disable the timeout.
5.
Click Save.