Xerox WorkCentre 7835ii - Manual (Page 57)

Network Connectivity
Xerox ® WorkCentre ® 7800/7800i Series Color Multifunction Printer 57
System Administrator Guide
NTP
The Network Time Protocol (NTP) synchronizes the internal clocks of computers over a network
connection at system startup and every subsequent 24-hour period thereafter. If your printer uses DHCP
and an NTP server, or if a DHCP server provides Greenwich Mean Time (GMT) offset, these settings are
ignored.
1.
In Xerox ® CentreWare ® Internet Services, click Properties > Connectivity > Setup.
2. Under Protocol, next to NTP, click Edit.
3. Under NTP Enabled, select Enabled.
4. Select IPV4 Address or Host Name.
5. Under IP Address: Port and Alternate IP Address: Port, type the address and port numbers.
6. Click Save.
7. For the new settings to take effect, restart your printer.