RIGOL DM3068 - Manual (Page 107)

Chapter 2 Front Panel Operations RIGOL
User’s Guide for DM3068 2-65
Save and Recall
The multimeter allows you to save the system configuration or measurement data
into the internal memory or an external USB storage device and recall it when
required.
Press
to enter the following interface.
 Disk: choose a desired storage location. “C:\” indicates the internal memory,
while “A:\” indicates the external USB storage device.
 Type: choose a desired file type for storing or reading. Please refer to “Storage
Type”.
 Read: read the selected file. This menu is available only when the current disk
contains the specified type of file.
 Save: enter the filename input interface. This menu is available only when the
current disk allows the specified type of file.
 Erase: clear the selected file. This menu is available only when the current disk
contains the specified type of file.