RIGOL DM3068 - Manual (Page 70)

RIGOL Chapter 2 Front Panel Operations
User’s Guide for DM3068 2-28
User-defined Sensor
Press
 New  User to enter the following interface.
 Prpty: set the sensor name, type and unit.
 Define: define the response curve of the sensor.
1. Define the Sensor Name
Press Prpty  Name to enter the following interface and enter a name that is
easy to understand for the newly defined sensor. The name should be within 9
characters.
Name/File Name Input Method
Press the up or down direction key to place the cursor in the File Name Input
Area or Character Selecting Area.
 When the File Name Input Area is selected, the Character Selecting Area is
hidden automatically and you can select the cursor position to be edited by
pressing the right and left direction keys (or press and hold the key).
 In Character Selecting Area, choose the desired character using the right
and left direction keys. At this point, the character in the File Name Input
Area changes accordingly (after choosing the desired character, select the
File Name Input Area and press the right direction key to confirm the
character selected and move the cursor to the next position).
Uppercase letter, lowercase letter and number can be use for defining the name.
 A: input uppercase letters (A-Z).
 a: input lowercase letters (a-z).
 1: input numbers (0-9).
File Name
Input Area
Character
Selecting Area