Installation procedures, Installation procedures -22 – RIGOL DM3068 User Manual
Page 40
Advertising
RIGOL
User’s Guide for DM3068
1-22
Installation Procedures
This operation should be executed only by authorized personnel. Improper
operations may cause instrument damage or incorrect installation of the
instrument into the machine cabinet.
1. Remove the handle: grip the handle by both sides and pull outward; then, pull
upward.
2. Install left and right plates: aim the detents of right and left plates at the
openings on support board and insert respectively, then fix them using eight
M4 screws.
Advertising
This manual is related to the following products: