Rose Electronics QuadraVista HDMI - Manual (Page 10)

6 Installation and Operations Manual
Operating Modes
Two operating modes are available:
 Host operation mode
 Remote operation mode
Host Operation Mode
When the QuadraVista HDMI is in Host operation mode, a keyboard and
mouse connected to the Unit are used to control the QuadraVista itself. A
larger mouse cursor is displayed, and actions such as changing the size and
position of up to four remote computer windows are enabled.
NOTE:
Upon re-connecting the keyboard or mouse, the cursor may
disappear in Host operation mode (press the Pause/Break key to
solve this problem).
Remote Operation Mode
When the Unit is in Remote operation mode, the keyboard and mouse are
used to control a specific computer connected to the QuadraVista HDMI.
Special functions are available in both Host and Remote operation modes:
 When Host operation mode is active, use the mouse connected to the
Unit to re-size and re-position any windows on the output display.
 When Remote operation mode is active, operate a single computer
system displayed as a window on the screen using the mouse and
keyboard connected to the Unit.
 Switch from host mode to remote mode by moving the Host cursor into
a specific computer window on the display and double-clicking the left
mouse button, or by clicking the “enter” icon in that window.
 To switch operation back to the Host use the keyboard hotkeys. The
host cursor will reappear.
 In Remote mode, you can control a computer with up to four windows
shown simultaneously on the display, or you can resize the computer’s
window to fill the display.
 When in Remote operation mode, the unit automatically transfers the
mouse / keyboard input signal to the specific computer.