Rose Electronics QuadraVista HDMI User Manual
Page 77
Advertising
Installation and Operations Manual
73
2. Select a saved file, and then click OK to load the preset.
NOTE:
•
When saving your preset do not use the same filename as the
system’s default preset filename (e.g., layout1.GP1 / layout2.GP1 /
layout3.GP1).
•
The sequence for loading the preset file when using the hotkeys ( - / ¯
arrow keys) is based on the time when the preset file was first
created and saved. Subsequent modification and saves will not affect
this sequence (order).
•
The hotkey Ctrl + S can save the latest preset to flash memory so that
on the next boot-up the preset will be loaded.
Advertising