Rose Electronics QuadraVista HDMI User Manual
Page 79
Advertising
Installation and Operations Manual
75
2. The following screen appears.
3. Select the Image Window, then you can adjust the input signal such as,
Brightness (0 – 255), Saturation (0 – 255), Contrast (0 – 255), and Hue
(0 – 255) parameters directly by using the sliders or clicking the radio
button. Click the Default button on the lower right portion of the screen
to reset the values to the factory-default.
NOTE: Saturation and Hue is not available for DVI signal input.
Advertising