Rose Electronics QuadraVista HDMI - Manual (Page 100)

96 Installation and Operations Manual
IMPORTANT:

We highly recommend using a USB connection instead of a PS-2
connection when available. In case no USB connection is available and you
must use a PS-2 connection, make sure to first power to the QuadraVista
HDMI (refer to a later step), then turn on your computer system
afterwards.

(For Windows 2000 users) Upon connecting the USB device for the first
time on your computer system, you may be required to perform the on-screen
steps to be able to use the USB device.
5. Connect the touch screen monitor display’s DVI / HDMI signal cable (a
DVI-to-HDMI converter may be required) to the HDMI OUT connector
on the rear panel
.