Rose Electronics QuadraVista HDMI - Manual (Page 40)

36 Installation and Operations Manual
1. The Active Window Border feature allows you to set the border color of
the active window. Each pixel / line can be set to have a different color,
and all lines can be set to be the same color (All Lines) by clicking the
radio button to select the Line #. Then click Select Color to choose the
color.
There are eight options for choosing the 3D border. Click the radio button for
one of the 3D borders to select it.
2. To swap the two mouse buttons so that you can use the right button as
the left button, click the checkbox to enable Switch primary and
secondary buttons.
3. If the item Transfer control to This Computer is enabled (with
checkmark), mouse / keyboard control will transfer to the particular
window (computer) that has just entered full screen mode.
NOTE: Default setting is disabled (mouse / keyboard control does not
transfer to a particular computer that enters full screen mode).
4.
Click the radio button for Return to previous layout when pressing
Pause/ Break key under the item When Returning From Full
Screen to Host Mode if you wish to return the display to the
previous layout upon pressing the Pause/Break key.
NOTE: Default setting is Remain Full Screen when pressing Pause/Break
key.
5. When the item Swap with Active Window is enabled (with checkmark) –
the action of entering a computer window (other than the current active
window) will cause both active and newly entered windows to swap
position.