Rose Electronics QuadraVista HDMI - Manual (Page 11)

SET-UP for QVConfig Software
Installation and Operations Manual 7
Setting Up Static IP
The QuadraVista HDMI’s configuration is controlled with an external
computer running the QVConfig program. Prior to running the program for
the first time, the computer’s LAN connection will need to be changed to a
static IP address with a similar range to the QuadraVista HDMI’s factory
default IP address of 210.100.100.151.
Change the IP Address of the Controlling Computer
On your computer, display the Local Area Connection Properties and
highlight “Internet Protocol (TCP/IP)” and click on the Properties tab.
When the next screen appears, click the radio button to select Use the
following IP address: and then enter the IP address 210 . 100 . 100 . x (where x is
any value from 1 – 253), and Subnet mask: 255 . 255 . 255 . 0.