Rose Electronics QuadraVista HDMI User Manual
Page 70
66
Installation and Operations Manual
NOTE: To pan is to move the image around in the image window, usually
when the image is larger than its window. Panning changes the
image view in the same way that scrolling moves the image up,
down, to the left, or to the right in the image window. When the
entire image is not displayed, you can quickly pan to see parts of
he image that were previously hidden.
Aspect Auto Detect
This allows you to set the input signal’s aspect ratio for a particular window.
If the input signal is of a different aspect ratio than the monitor in which it is
displayed, you may change the monitor’s aspect ratio to display the signal
without deformation.
1. Right-click the mouse on a particular window and click Aspect Auto
Detect. When the next screen appears, click the mouse to select
Enable and then select the desired aspect ratio.
2. Click Update, and the click OK