Roland SP-404MKII Creative Sampler and Effector - Manual (Page 137)

Appendix
137
Parameter Value Explanation
SPREAD
UNISON, TINY, SMALL,
MEDIUM, HUGE
Sets the octave of the resonator.
CHARACTER 0–100 Adjusts the brightness and detuning of the sound.
SCALE C maj–B maj, C min–B min Sets the composite notes (chord) to resonate.
FEEDBACK 0–99 (%) Adjusts the amount of feedback for the effect.
ENV MOD 0–100 Larger values increase the amount of feedback according to the input level.
Ring Mod
This effect alters the tonal character to make the sound more metallic.
Parameter Value Explanation
FREQUENCY 0–100 Sets the frequency range to which the effect is applied.
SENS 0–100 Adjusts the volume of the effect sound.
BALANCE 100-0–0-100 (%) Adjusts the volume balance between dry (the original sound) and effect sound.
POLARITY OFF, ON Sets the direction in which the frequency modulation moves.
EQ LOW -15–15 (dB) Adjusts the amount of boost/cut of the low-frequency range.
EQ HIGH -15–15 (dB) Adjusts the amount of boost/cut of the high-frequency range.
Crusher
Produces a lo-fi effect.
Parameter Value Explanation
FILTER
331–15392
(Hz)
Sets the frequency range in which the pre-filter (the filter that the sound passes through
before effects are applied) works.
RATE
0–100 Sets the sample rate of the effect. Larger values make the sample rate lower, for a more lo-fi
sound.
BALANCE 100-0–0-100
(%)
Adjusts the volume balance between dry (the original sound) and effect sound.
Overdrive
Mildly distorts the sound.
Parameter Value Explanation
DRIVE 0–100 Adjusts the amount of distortion.
TONE
-100–100 Sets the tone. Larger settings emphasize the high-frequency range. Smaller settings
emphasize the low-frequency range.
BALANCE 100-0–0-100
(%)
Adjusts the volume balance between dry (the original sound) and effect sound.
LEVEL 0–100 Adjusts the volume of the effect sound.
Distortion
Intensely distorts the sound.
Parameter Value Explanation
DRIVE 0–100 Adjusts the amount of distortion.
TONE
-100–100 Sets the tone. Larger settings emphasize the high-frequency range. Smaller settings
emphasize the low-frequency range.
BALANCE 100-0–0-100
(%)
Adjusts the volume balance between dry (the original sound) and effect sound.
LEVEL 0–100 Adjusts the volume of the effect sound.