Initializing the sample parameters (init param) – Roland SP-404MKII Creative Sampler and Effector User Manual
Page 55
Advertising
Editing a Sample (SAMPLE EDIT)
55
Initializing the Sample Parameters (INIT PARAM)
This restores the parameters set in a sample (such as the start point, end point, tempo and so on) to their default values.
1.
Hold down the [SHIFT] button and press the pad [6].
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
2.
Use the [VALUE] knob to select “OK”, and press the [VALUE] knob.
The parameters are now initialized.
Advertising