Roland SP-404MKII Creative Sampler and Effector User Manual

Page 151

Advertising

Appendix

151

Function

Transmitted

Recognized

Remarks

*3: Output when MIDI Sync Out is “ON” and when there is no tempo input from an external device.

*4: Enabled when this unit is in remote mode (when a tempo signal is received from an external device).

*5: All samples stop playing back when the MIDI cable is unplugged.

*6: Enabled when playing samples in chromatic mode (MIDI CH 16).

*7:

MIDI channels

CH 1: BUS 1

CH 2: BUS 2

CH 3: BUS 3

CH 4: BUS 4

CH 5: INPUT

Control change message numbers and corresponding EFX controls

CC#19

EFX switch (0–63: OFF, 64–127: ON)

CC#83

EFX number (0–127)

“

Control change messages and corresponding effects

(P.140)”

CC#16

Ctrl 1 (0–127)

CC#17

Ctrl 2 (0–127)

CC#18

Ctrl 3 (0–127)

CC#80

Ctrl 4 (0–127)

CC#81

Ctrl 5 (0–127)

CC#82

Ctrl 6 (0–127)

*8:

Control change message numbers and corresponding controllers in DJ mode

MIDI channel 1 (CH1 sample) MIDI channel 2 (CH2 sample) MIDI channels 3 (pattern

sequencer)

CC#7 [Ctrl 1] knob: CH1 volume

slider (0–127)

[Ctrl 2] knob: CH2 volume

slider (0–127)

[Ctrl 1] knob: pattern sequencer

volume slider (0–127)

CC#8 [Ctrl 3] knob: X-FADE (CH1:

CH2 = 127:0–0:127)

CC#20 [

] button (0: pause, 127:

play)

[

] button (0: pause, 127:

play)

[

] button (0: pause, 127:

play)

CC#21 [

] button (0: release the