Roland SP-404MKII Creative Sampler and Effector - Manual (Page 74)

Combining Samples to Create a Pattern (PATTERN SEQUENCER)
74
Deleting Pad Mute Operations Recorded in a Pattern (PAD MUTE MOTION ERASE)
Here’s how to delete pad mute operations that you recorded using the steps shown in “ Recording Effect Operations to a Pattern
(EFX MOTION REC) (P.71)” from a pattern.
1. Press the [PATTERN SELECT] button.
2. Press the [PATTERN EDIT] button.
3. Press pads [1]–[16] to select the pattern you want to edit.
The pattern edit screen appears.
4. Hold down the [DEL] button and press the [REVERSE] button.
The “Operation Completed!” message appears.
The pad mute operations are now deleted.
Deleting Specific Pad Mute Operations from a Pattern
This shows how to delete specific pad mute operations that you recorded using the steps shown in “ Recording Pad Mute
Operations to a Pattern (PAD MUTE MOTION REC) (P.73)” from a pattern.
1. Press the [PATTERN SELECT] button.
Pads to which patterns are assigned light up purple.
2. Press pads [1]–[16] to select the pattern from which you want to delete the pad mute operations.
This plays back the pattern.
3. Press the [REC] button.
The pattern begins recording in real time.
4. Hold down the [SHIFT] button and press the [REVERSE] and [REMAIN] buttons.
The message “PAD MUTE MODE (Motion REC)” appears (PAD MUTE MOTION REC).
The pad mute operations now begin recording.
5. Press the [DEL] button.
The message “PAD MUTE MODE (Motion ERASE)” appears (PAD MUTE MOTION ERASE).
Now you can delete the pad mute operations.
The pads light up blue.
6. Listen to the pattern. When the part for which you want to delete the pad mute operations plays, press
the pads [1]–[16] (the pads with the pad mute operations you want to delete).
The pad mute operations recorded for that pad are deleted while you hold down the pad.
7. When you’ve finished deleting, press the [DEL] button.
The message “PAD MUTE MODE (MOTION REC)” appears.
The unit returns to recording pad mute operations (PAD MUTE MOTION REC).