Roland SP-404MKII Creative Sampler and Effector - Manual (Page 45)

Editing a Sample (SAMPLE EDIT)
45
Processing a Sample
You can use the start point and end point settings to process a sample.
Note that this operation directly processes the original sample data. Once you process a sample in this way, it cannot be
restored.
1. Set the start and end points by following the steps in “ Setting the Playback and Loop Regions
(START/END) (P.44)”.
2. Press the [VALUE] knob.
A menu appears.
3. Use the [VALUE] knob to select the item, and press the [VALUE] knob.
The sample is processed.
Item Action
TRUNCATE Trims (deletes) the sample’s audio regions before the start point and after the end point.
NORMALIZE Increases the overall volume.
EMPHASIS Increases the high-frequency sound.
CANCEL Closes the menu screen.