FUJITSU TeamPoS 3000 XL - Manual (Page 11)

TeamPoS 3000 XL and XL
2
Overview
D900000145 Issue 3 1-1
Chapter 1. Overview
This manual is provided to illustrate how to install and maintain the TeamPoS 3000 XL
and XL
2
and describes in detail the procedures required for field installation and
maintenance, including site preparation, equipment inspection, BIOS setting, and trouble
shooting the controller.
The following sections provide a brief overview of the TeamPoS 3000 XL and XL
2
control units (standard and compact) and peripherals:
TeamPoS 3000 w/12.1” LCD
TeamPoS 3000 w/15” LCD
The
TeamPoS 3000 is a state-of-the-art Point-of-Sale (POS) terminal. Built on an
industry standard platform the TeamPoS 3000 leverages Intel embedded components and
standard operating system, software applications and peripherals. It supports standard PC
components such as high-performance CPU’s, memory, hard disk, video and audio. It
can be used as a PC, to run standard PC applications, such as word processing,
spreadsheets, etc., subject to operating system and licensing restrictions. This controller
offers
duplicate 2.5” hard disk drives, on board LAN, 12.1” or 15” LCD's; USB, Combo
and COM I/O boards and on a variety of software platforms. The TeamPoS 3000 XL and
XL
2
also contain functionality required by retail application software and are "retail
hardened" to support the harsh environments found in most retail stores. Depending on
the application requirements, there are a very large number of possible configurations.
Memory capacity, number of hard disks, CPU speed, and the number of powered RS232
and USB ports are selectable by the customer. Chassis configurations, memory, memory
storage devices (such as CD and DVD drive), and operating systems are also selectable.