FUJITSU TeamPoS 3000 XL - Manual (Page 51)

TeamPoS 3000 XL and XL
2
Installation
D900000145 Issue 3 5-5
5. Pull white release lever below the motherboard assembly out and to the left.
6. Pull the entire assembly out of the controller.
7. To reinstall, make sure that the assembly rails line up with the rails in the chassis.
8.
Slide the motherboard assembly in with the release lever at 45° angle.
9. Push in slowly until motherboard assembly engages the lever.
10. Use the lever to fully seat the motherboard assembly.
11. Reinstall the front panel and reconnect the power cable (See Section 5.1.1).
12. Reinstall the back panel (See Section 5.1.2).