FUJITSU TeamPoS 3000 XL - Manual (Page 63)

TeamPoS 3000 XL and XL
2
Installation
D900000145 Issue 3 5-17
8.
Attach the gray ribbon cable to the motherboard. The white power cable needs to loop
around the ribbon cable as in the attached photo.
9. Reinstall the motherboard (See Section 5.2). Make sure the cables are clear of any
obstruction.
10. Pop out the cosmetic filler in the front panel.
11. Reinstall the front panel and reconnect the power cable (See Section 5.1.1).
12. Reinstall the back panel (See Section 5.1.2).
Ribbon cable is “Z”
folded to fit.
White power cable loops
around ribbon cable
Cosmetic Filler