FUJITSU TeamPoS 3000 XL User Manual
Page 53
TeamPoS 3000 XL and XL
2
Installation
D900000145
Issue 3
5-7
6. Open the CPU lock by turning approximately ¼ turn counterclockwise. Lock
and
Unlocked
icons are imprinted in the CPU mount as a reminder.
7. Place the CPU on the CPU socket with the arrows aligned.
8. Using a small flathead screwdriver, rotate the lock 1/4
turn clockwise to the lock position.
9. Place the heat sink over the CPU with fins
aligned front to back and secure the heat sink
with the four screws attached to it. Grip the
heat sink bracket to hold it in place while the
spring-mounted screws are tightened.
CPU Lock
Unlock –~1/4 turn counter clockwise
Lock –~1/4 turn clockwise
Align arrows here
White arrow on
socket
Note: When replacing the CPU, do not reuse the existing heat sink without having proper heat
sink compound for heat dissipation. Otherwise damage to CPU could result.