Single stacked lcd stand – FUJITSU TeamPoS 3000 XL User Manual
Page 87
TeamPoS 3000 XL and XL
2
Installation
D900000145
Issue 3
5-41
5.14.1.
Single Stacked LCD Stand
Single Stacked LCD Stand
1. Remove only the hinge cap and cable access cover from the stand; leave the top and
bottom hinge cover in place. Some photos in this section show the top and bottom hinge
cover and cover removed in order to more clearly show the cable route; however,
assembly is easier if the bottom hinge cover and top hinge cover are left in place.
2. Remove the cable access cover by pressing from
the underside. The cable access cover should pop
out easily.
3. To remove the hinge cap, grasp it firmly as shown in the
photo and pull back using your thumbs.
Cable Access
Cover
Top Hinge
Cover
Lower Hinge
Cover
Hinge Cap
Top Hinge
Cover
Lower Hinge
Cover