FUJITSU TeamPoS 3000 XL - Manual (Page 124)

TeamPoS 3000 XL and XL
2
Installation
D900000145 Issue 3 5-78
5.19. Installing the Printer I/O Board (DT50 Series only).
The DT 50 Series printer comes without the I/O board installed. The I/O Board is ordered
separately and either installed at the Foothill Ranch facility or in the field.
1. Turn printer upside down on a clean dry surface.
2. Remove blanking plate for I/O port if necessary.
3. Remove cosmetic back panel if it interferes with installation.