FUJITSU TeamPoS 3000 XL - Manual (Page 152)

TeamPoS 3000 XL and XL
2
Maintenance
D900000145 Issue 3 7-19
7.5.2 Adding or Replacing XL2 Motherboard Memory
Caution: Be sure to observe all ESD precautions and power off procedures.
The TeamPoS 3000 XL
2
1. Remove the rear panel, (See Section 5.1.2).
Motherboard has two memory sockets or slots and can use 512MB,
1GB or 2GB SO-DIMM memory in different combinations.
2. Disconnect the power cable from the controller.
3. Remove the front panel (See Section 5.1.1). The yellow LED should be off (See Section
1.2).
4. Remove the motherboard assembly (See Section 5.2).