FUJITSU TeamPoS 3000 XL - Manual (Page 70)

TeamPoS 3000 XL and XL
2
Installation
D900000145 Issue 3 5-24
5.11. Installing the I/O Boards
Caution: Be sure to observe all ESD precautions and power off procedures.
The following I/O board options are available on the TeamPoS 3000XL and XL
2
:
1. No I/O board.
2. Single Powered USB (one board with 3 powered USB ports).
3. Combo Board (The XL Combo Board has 6 powered USB ports, and 2 RS232 ports. On
the XL
2
there are only 5 active USB ports and 2 RS232 ports).
4. Combo Board with COM Board (Combo board in #3 plus COM Board with 3x RS232
ports). COM board cannot be used with the XL
2
motherboard.
Note: The Combo board cannot be combined with single powered USB. The Combo board
can be installed without the COM board on the TeamPoS 3000 only, but the COM
board cannot be installed without the Combo board.