FUJITSU TeamPoS 3000 XL - Manual (Page 237)

TeamPoS 3000 XL and XL
2
BIOS XL
2
Motherboard
D900000145 Issue 3 10-13
10.1.14. Super IO Feature Setup – XL
2
All options are shown here, however on the BIOS screens it will be necessary to scroll down to
see all the options:
Factory Default Settings
Motherboard
Phoenix TrustedCore™ Setup Utility
Main Advanced Security TPM State Power Boot Exit
Super IO Feature Item Specific Help
Serial port A: [Enabled]
Base I/O address: [3F8]
Interrupt: [IRQ 4]
Serial port B: [Enabled]
Base I/O address: [2F8]
Interrupt: [IRQ 3]
Serial port C: [Enabled]
Base I/O address: [3E8]
Interrupt: [IRQ 6]
Serial port D: [Enabled]
Base I/O address: [2E8]
Interrupt: [IRQ 7]
Powered COM1 Configuration [Disabled]
Powered COM2 Configuration [Disabled]
PS/2 Mouse Support [Enabled]
 Console Redirection
COM Port Address [Disabled]
BAUD Rate [19.2K]
Console Type [PC ANSI]
Flow Control [None]
Continue C.R. After Post [ OFF]
F1 Help
 
Select Item -/+ Change Values F9 Setup
Defaults
Esc Exit
 
Select Menu Enter Select  Submenu F10 Save and Exit