FUJITSU TeamPoS 3000 XL - Manual (Page 89)

TeamPoS 3000 XL and XL
2
Installation
D900000145 Issue 3 5-43
7. Place the LCD face down on a clean dry surface. Remove the back cover by pressing in
where indicated by symbol. Note the screws required to attach the LCD are taped to the
inside of this cover.
Back of LCD
Back Cover
8. Attach the cables to the connectors on the LCD. Connector labels are etched into the
plastic casing of the LCD monitor.
9.
Press Here and Lift
Mounting Screws
Panhead, Phillips
M3x0.5 x 8mm
DVI VGA
A to B USB for opt.
MSR or Keypad MSR
Audio
pUSB
LCD Power for opt.
power brick
Touch Panel 1-2
Switch
Notches for lower hinge cover