FUJITSU TeamPoS 3000 XL - Manual (Page 61)

TeamPoS 3000 XL and XL
2
Installation
D900000145 Issue 3 5-15
5.7. Installing the CD/DVD Drive
Caution: Be sure to observe all ESD precautions and power off procedures.
The CD/DVD drive rides on top of the motherboard assembly and requires a narrow Phillips-
head screwdriver to install.
1. Remove the rear panel (See Section 5.1.2).
2.
Disconnect the AC power cord from the controller.
3. Remove the front panel (See Section 5.1.1). The yellow LED should be off.
4. Remove motherboard assembly. (See Section 5.2).
5. Remove the metal blanking plate by removing the 2 screws holding it in place. Retain
the screws.