FUJITSU TeamPoS 3000 XL - Manual (Page 128)

TeamPoS 3000 XL and XL
2
Installation
D900000145 Issue 3 5-82
5.20.2. Stacking the CT10 Printer
1. Install Central Filler (See Section 5.17.2)
2. Install narrow Side Filler by placing it on the chassis with the front edge aligned with
the Central Filler and ½” to the left of the Central Filler (facing the front of the unit).
3. Slide to the right.
CT10 Printer Bracket
Note lip & tabs
Front Filler Bracket
Side Filler Bracket
(Identical to Central
Filler Bracket)
Central Filler
Bracket
Bottom of CT10
Printer
CT10 Printer Bracket
Tabs fit in these slots.
Rear of CT10 Printer
fits against rear lip.
Printer Bracket
Side Filler
Central Filler
LCD
Front Filler Bracket
(tabs hook toward back)