FUJITSU TeamPoS 3000 XL - Manual (Page 193)

TeamPoS 3000 XL and XL
2
Maintenance
D900000145 Issue 3 7-60
13. Insert new backplane PCB into the chassis fitting the com ports into the openings. Attach
with the 6 screws.
14. Attach the Hex Standoffs.
15. Reattach all I/O boards (Section 7.9), PCI card (Section 7.10), and the power supply
(Section 7.11).
16. Reinstall backplane assembly into the chassis.
17. Reinstall the motherboard (See Section 5.2).
18. Reinstall the front panel and reconnect the power cable (See Section 5.1.1).
19. Reinstall the back panel (See Section 5.1.2).