FUJITSU TeamPoS 3000 XL - Manual (Page 178)

TeamPoS 3000 XL and XL
2
Maintenance
D900000145 Issue 3 7-45
8. Invert Combo board (ports face away from the backplane). Connect the three port cables
to the following ports on the backplane: J10, J11, and J13. The connectors are labeled.
c
9. Connect the narrow ribbon cable to port J12 on the backplane and to Combo card.
10. Connect the wide ribbon cable on the COM board to the COM-Out connector on the
Combo board