FUJITSU TeamPoS 3000 XL - Manual (Page 206)

TeamPos 3000 XL and XL
2
Troubleshooting
D900000145 Issue 3 8-10
8.12 Operation errors of other peripheral devices
No Check item Judgment Action
1 Is the cable connected correctly?
Y
N Go to No. 2.
Connect the cable correctly.
2
Does WINCLD operate properly with
this peripheral? Y
N Check the program.
Go to No. 3.
3
Can the system be activated after
replacing the associated I/O board? Y
N End.
Go to No. 4.
4
Can the system be activated after
replacing the motherboard? Y
N End.
Go to No. 5.
5
Can the system be activated after
replacing the power supply? Y
N End
Change the controller.
Caution: Before replacing any boards, unplug the power cable and make
sure the motherboard standby power LED light is out.