FUJITSU TeamPoS 3000 XL - Manual (Page 151)

TeamPoS 3000 XL and XL
2
Maintenance
7-18 Issue 3 D900000145
5. Remove memory by pressing down on the white locking levers at the side of each socket.
6. Insert memory (or additional memory) into an empty socket. (There is only one way the
memory stick will fit.)
7. Check to make sure that both levers for the socket are locked into place.
8. If this is an upgrade, install the upgrade label that comes with the upgrade kit to the side
of the unit near the serial number. (See Section 7.2).