Genicom cL160 User Manual
Page 108
Publication No. GEG-99141
Genicom
Apr 02
4-8
GENICOM Intelliprint cL160 User Guide
Clearing Paper Jams
Paper jams in the fuser unit:
Follow the procedure below to remove paper jammed in the fuser unit.
1.
Press button ‘B’
➀
and open the upper part of the front cover
➁
.
2.
Lift the levers at both ends of the fuser unit, and remove the jammed paper. If the paper is
torn, remove any scraps of paper remaining inside the printer.
NOTE:
During operation, the fuser unit (heater) becomes very hot. To prevent burns, do not touch it
with your bare hands.
Completely push down the levers at both ends of the fuser after removing the jammed paper.
3.
If you cannot see the jammed paper, it may be jammed around the drum cartridge. Refer to
“Paper jams around the drum cartridge:” on page 4-7
to remove the jammed paper.