Genicom cL160 - Manual (Page 168)

Publication No. GEG-99141 Genicom Apr 02
7-18 GENICOM Intelliprint cL160 User Guide
System Menu
Job Timeout
This submenu allows you to
increase or decrease the time limit
(in seconds) for PostScript jobs. A
0 setting indicates no timeout. This
setting applies only to PostScript
jobs. 0 0 - 99999 1. Press NEXT or PREVIOUS to
increase or decrease each digit of
the five-digit number.
2. Press SELECT set one digit and
move to the next digit.
3. Press SELECT after changing the
last digit to save this setting.
Jam Recovery
This submenu allows you to turn
jam recovery on or off. On On
Off 1. Press NEXT or PREVIOUS to toggle
between ON and OFF.
2. Press SELECT to save this setting.
Hex Print
This submenu allows you to print
hexadecimal characters. Off On
Off 1. Press NEXT or PREVIOUS to toggle
between ON and OFF.
2. Press SELECT to save this setting.
Toner Out
This submenu allows you to specify
whether the printer should stop or
continue when out of toner. Stop Stop
Continue 1. Press NEXT or PREVIOUS to toggle
between STOP and CONTINUE.
2. Press SELECT to save this setting.
Submenus Default Setting Available Settings Procedure for Changing Setting