Loading envelopes in the multi purpose tray 2-19 – Genicom cL160 User Manual
Page 71
Apr 02
Genicom
Publication No. GEG-99141
GENICOM Intelliprint cL160 User Guide
2-19
Selecting Print Media
NOTE:
When printing on the back of pre-printed postcards, make sure the postcards are not bent. Even
slightly bent postcards can cause paper jams. Flatten bent postcards by hand before loading
them. We do not recommend printing on multicolored postcards.
Loading Envelopes in the Multi Purpose Tray
Feed envelopes from the Multi Purpose Tray. Open the envelope flaps before feeding and load them
as illustrated below.
NOTE:
Do not use envelopes that have tape seals. When using envelopes with an adhesive seal, make
sure that the adhesive is dry. Do not use envelopes larger than 3.5 inches wide and 5.5 inches
long (88.9 mm wide and 139.7 mm long).
Load the envelopes with the flap pointing outward.
Using poor quality envelopes can cause creasing and deteriorate print quality.