Genicom cL160 - Manual (Page 76)

Publication No. GEG-99141 Genicom Apr 02
2-24 GENICOM Intelliprint cL160 User Guide
Selecting Print Media
Transporting the Printer
Before transporting the printer by car or truck over long distances, follow the procedure below to
prevent strong vibrations from damaging the printer.
NOTE: When carrying the printer, keep it level to prevent trays or consumables from falling out. Do not
tilt it more than 10 degrees in any direction.
Do not remove the toner cartridges before moving the printer. Toner may spill inside the printer
and damage it.
When the optional High Capacity Feeder (2 shelves) is installed, remove it before transporting
the printer. If the High Capacity Feeder is not removed, it may fall, resulting in damage or injury.
To remove the High Capacity Feeder, refer to chapter
”Chapter 6 Options” .”
CAUTION:
Because the printer weighs 80 lbs. (34.5 kg) fully assembled, make sure that at least two peo-
ple carry it.
To lift the printer, face the front and back of the printer and grip the recessed areas at the bot-
tom left and right with both hands. Never try to lift the printer by gripping any other areas. Lift-
ing the printer by gripping other areas can cause the printer to fall, resulting in injury.
Bend your knees when lifting the printer to avoid back injuries.
There is danger of the printer falling.