Installation procedure, Removing the packing tape 1-8 – Genicom cL160 User Manual
Publication No. GEG-99141
GENICOM Intelliprint cL160 User Guide
Transporting the Printer
Install the printer as follows:
Remove all the packing tape from the printer.
Remove all the spacers from the printer.
Install the drum cartridge.
Install the toner cartridges.
Load the paper.
Plug the power cord.
Spacers are installed in various parts of the printer to protect it from shock and vibrations
during shipping. Make sure you remove all the spacers before using the printer.
If you purchased the optional High Capacity Feeder (2 shelves), install it first. For details on
installing optional accessories,
and the literature accompanying the
High Capacity Feeder.
Keep the cardboard box, handles, polystyrene packaging and spacers in case you need to
transport the printer over long distances in the future.
Removing the packing tape
When you first remove the printer from its box, there is packing tape in 8 places to secure the covers
during shipping. Refer to the illustrations below and remove all the packing tape from the printer.