Genicom cL160 - Manual (Page 91)

Apr 02 Genicom Publication No. GEG-99141
GENICOM Intelliprint cL160 User Guide 3-9
Troubleshooting
2. Push up button ‘A’
➀
and fully open the front cover
➁
.
3. Grip the tabs at both ends of the transfer roller and gently lift it out of the printer.
NOTE: Lift the roller carefully to prevent waste toner from spilling out.
4. Gently wipe the density sensor window with a clean dry cloth or cotton swab.
NOTE: Do not allow anything hard to come into contact with the density sensor window. Do not use
excessive force to clean the window.