Genicom cL160 - Manual (Page 181)

Apr 02 Genicom Publication No. GEG-99141
GENICOM Intelliprint cL160 User Guide 8-3
Installing DRAM Memory DIMMS
3. Turn thumbscrews on controller assembly counterclockwise until loose and gently pull con-
troller assembly towards you to remove from printer.
4. Carefully insert a DRAM DIMM which is compatible with your printer into any available
DRAM DIMM slot as shown below. When properly seated, gently push down on the DIMM
until the white braces close and snap onto the ends of the DIMM.