Genicom cL160 User Manual
Publication No. GEG-99141
GENICOM Intelliprint cL160 User Guide
Transporting the Printer
-Make sure that the end guide is properly inserted into the holes corresponding to the
appropriate paper size.
-Only a small amount of movement of the end paper guide can make automatic paper size
detection impossible. If this occurs, move the end paper guide all the way to its outermost
position again, then realign it with the appropriate paper size mark.
Align the four corners of the paper stack and insert the paper (print side up) under the tab.
Do not use paper that is folded, creased, or heavily warped.
Do not overload the paper tray.
Align the side guides with the edges of the paper.
Pushing the paper guides too hard against the edges of the paper stack can cause a paper jam.
However, if the paper guide is too loose, the paper may twist as it feeds through the printer.