Genicom cL160 - Manual (Page 13)

Apr 02 Genicom Publication No. GEG-99141
GENICOM Intelliprint cL160 User Guide 5
Safety Precautions
Conventions
This following conventions are used throughout this manual to emphasize certain procedures or
information:
NOTE: A note is a tip or extra information that may be helpful in installing or using the printer.
This symbol alerts you to procedures that require close attention. Make sure you read and fol-
low the instructions carefully.
This symbol alerts you to prohibited procedures. Make sure you read the instructions carefully.
This symbol alerts you to procedures that should be performed. Make sure you perform the
procedure after reading the instructions carefully.
Installing and Relocating Your Printer
Do not place the printer in a hot, humid, dusty, or poorly ventilated environment. Pro-
longed exposure to these adverse conditions can cause fire or electric shocks.
Do not place the printer near heaters or near volatile, flammable, or combustible materials,
such as curtains, that may catch fire.
Place the printer on a level and sturdy surface that can withstand a good weight. If tilted, the
printer may fall and cause injuries.
Because the printer weighs 34.5 kg fully assembled, therefore make sure that at least two
people carry it.
To lift the printer, face the front and back of the printer and, with both hands, grip the
recessed areas at the bottom left and right. Never try to lift the printer by gripping any other
areas. Lifting the printer by gripping other areas can cause the printer to fall, resulting in
injury.
CAUTION: A caution message provides information that may help you avoid equipment
damage, process failure, or inconvenience. Read all caution messages carefully. GENICOM
will not be responsible for damage that results from improper use of the printer.
WARNING! A warning message indicates the possibility of personal injury if a specific proce-
dure is not performed exactly as described in the guide. Pay close attention to these sec-
tions and read them fully to prevent possible injury. GENICOM will not be responsible for
damage that results from improper use of the printer.