Genicom cL160 - Manual (Page 160)

Publication No. GEG-99141 Genicom Apr 02
7-10 GENICOM Intelliprint cL160 User Guide
Interface Menu
Interface Menu
The Interface Menu provides access to the printer interface settings. Use the following procedure
to enter the interface menu:
1. Press the MENU button on the control panel.
2. Press the NEXT button until the text “Interface Menu” is shown on the second line of the
display.
3. Press the SELECT button to enter the interface menu.
4. Press the NEXT button to move through the submenus: Port, Parallel Setup, and
Network Setup.
5. Use the procedures in the following table to access and change the printer interface settings:
Submenus Default
Setting Available
Settings Procedure for Changing Setting
Port
This submenu allows you
to enable the type of
interface. Parallel:
On
Network Card
1:
Off
Parallel:
On, Off
Network Card 1:
On, Off
1. Press NEXT or PREVIOUS to toggle between
PARALLEL and NETWORK CARD 1.
2. Press SELECT to save this setting.