Genicom cL160 - Manual (Page 43)

Apr 02 Genicom Publication No. GEG-99141
GENICOM Intelliprint cL160 User Guide 1-23
Transporting the Printer
Installing the Tray Cover
Follow the procedure below to install the tray cover.
NOTE: The tray cover does not come standard with the printer.
1. Clip the hooks on the tray cover onto the 2 tabs at the back of the printer as illustrated.
Connecting the Power Cord
Follow the procedure below to connect the power cord.
WARNING: Connect the power plug to an AC outlet with the same voltage as the printer
(100V), and rated for at least 15A. No other devices should be plugged to this AC outlet,
as overheating could cause fire or electrical shock. The printer draws 10A at 100V.
The green ground wire of the power cord is meant to prevent electric shock or fire hazard
in the event of a power leak.
Connect it to the ground lead of the power outlet, or a copper pipe buried at least 650 mm
in the ground, or a type D earth connection.