About this appendix, Printing a font summary, Printing a font summary c-2 – Genicom cL160 User Manual
Page 200
Publication No. GEG-99141
Genicom
Apr 02
C-2
GENICOM Intelliprint cL160 User Guide
Printing a Font Summary
About this Appendix
This appendix explains the procedure for printing summaries of PCL or PostScript fonts installed
in your printer.
Printing a Font Summary
Your printer has the capability of printing summaries of all installed PCL or PostScript fonts. To
print a Font Summary, follow these steps:
1.
From the Ready status, press MENU, the control panel display will read:
Menu
Paper Menu
2.
Press PREVIOUS or NEXT until the display reads:
Menu
Functions
3.
Press SELECT, the display will read:
Functions
Reset Printer
4.
Press NEXT or PREVIOUS until the display reads:
Functions
Print Fonts
5.
Press SELECT, the display will read:
Print Fonts
PCL Fonts
NOTE:
You may toggle between PCL Fonts and Postscript Fonts using the PREVIOUS or NEXT
push-buttons.
6.
Press SELECT. A multi page Font Summary will print.
Examples of PCL and PostScript Font Summaries follow.