Genicom cL160 - Manual (Page 68)

Publication No. GEG-99141 Genicom Apr 02
2-16 GENICOM Intelliprint cL160 User Guide
Selecting Print Media
NOTE: When printing on long paper, pull out the tray extension. Printing long paper with the tray
extension retracted can cause the paper to fall out or make feeding impossible.
3. When using media such as transparency sheets, label sheets, or envelopes, fan the stack before
loading so that there is air between the sheets.
NOTE: Fanning the stack helps prevent paper jams caused when more than one sheet feeds at the
same time.
NOTE: Do not fan plain paper before loading.
If the paper is poorly cut and the edges are not clean, remove any unsuitable sheets before
loading the paper.
When printing on coated or glossy paper, feed the sheets one at a time. Moisture can cause the
sheets to stick together causing more than one sheet to be fed, which can result in malfunction
or damage.
4. Align the four corners of the paper stack and insert it (print side down) until it lightly touches
the feeding slot.