Siemens S5-135U/155U - Manual (Page 295)

7-5
System Manual
C79000-G8576-C199-06
7.1.2 Modes/Jumper Assignments of the IM 300
IM 300-3
X1
X2
12
16 9
8 1
J1
X3
LED 1
Figure 7-2 Location of Jumpers on the IM 300-3 (when Delivered)
You must insert an additional jumper 4-13 at location 12 for address setting
in the extended I/O area (O area).
Jumper 1 is open and has no function for operation in the S5-135U/155U
PLC.
Jumper
Assignments
Purpose of the
Jumpers
Interface Modules